Bondtech CHT Vol Coated Brass Nozzle

Buy a Bondtech CHT® Vol Coated Brass Nozzle from Spool3D in Canada for 3D printers at low prices online. These are nozzles for high flow applications Increase the Max Volumetric Flow of your Volcano heat block by 50% They are manufactured by Bondtech in-house, and will fit the following blocks/printers: E3D Volcano blocks Other Volcano type blocks Artillery Sidewinder X1 and X2 Anycubic Vyper FLSUN Super Racer Artillery Genius Pro Anycubic Kobra and Kobra Max Lulzbot TAZ MOARstruder Others compatible with Volcano… Features 1 unit per pack; Available sizes : 0.4, 0.6, 0.8, 1.0, and 1.2mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires a 6mm wrench Main Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains between 25 and 65% (check picture with test data) Competitive price/performance price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standard: Volcano (M6×1×14.5×21) May be used with 1.75 or 2.85mm hotends. Advantages of the Bondtech CHT™ technology: Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. White Paper Advantages of the Nickel Coating A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface. Recommended Materials Use this nozzle with the following materials: PLA ABS HIPS PC TPU TPE Nylon PETG ASA PP PVA For technical and abrasive materials we recommend to use other nozzles in our range. Different nozzle sets for different materials We recommend you to have several sets of nozzles because: Using different materials with the same nozzles causes deposit build-up inside the nozzle. These deposits will cause blockages. We recommend changing nozzles when changing materials. Free shipping in Canada on qualifying orders of 3D printer spare parts.

Bondtech (3)

Bondtech CHT® Coated Brass Nozzle – Fabreeko

4x Bondtech CHT BiMetal RepRap Coated Nozzle –

Buy 3D printers, filament, parts & tools, lowest prices

Bondtech CHT BiMetal Coated Nozzle – Slice Engineering

So what's the deal with 3-eye CHT nozzles? : r/3Dprinting

Bondtech BMG Drive Gears IDGA Kit –

In stock, quantities limited., Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials., Nozzle is supplied with

Bondtech CHT™ BiMetal Coated Brass Nozzle

Bondtech CHT® Coated Brass Nozzle for Volcano for Abrasive Material (1pack) - Bondtech CHT Nozzle (.6mm) : Industrial & Scientific

Bondtech CHT MK8 Coated Brass Nozzle 5

Nozzle Revo 0.6 mm / 1.75 mm

Bondtech CHT ® Coated Brass Nozzle For Volcano Type Heat Blocks

Bondtech CHT BiMetal MK8 Coated 3D Printer Nozzle

Copper and Hardened Steel nozzles for high flow applications with abrasive materials., Nozzles are supplied with Nickel Coating (grey color).,

Bondtech CHT BiMetal VOL Coated Brass Nozzle

Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive

Bondtech CHT Vol Coated Brass Nozzles - 5-Pack